<< Prev | Next >> |
The technical specifications for the appliance are summarized in the following sections:
- Power Cooling Module Specifications
- Power Consumption Specifications
- Disk Drive Specifications
- Enclosure Weight
- Enclosure Dimensions
- Enclosure Environment
Power Cooling Module Specifications
The system has two 100-240V dual fan SBB-compliant power cooling modules located at the rear of the enclosure. This provides an n+1 redundant power configuration. If a PCM fails, the system continues to operate normally on the remaining PCM until the failed module is replaced.
The head unit uses a 764W PCM whereas the EBOD enclosure uses a 580W PCM. The technical specifications associated with the PCMs are tabulated below:
Power Consumption Statistics
The power consumption data for the various models of 5000/7000 appliance family are tabulated below:
Disk Drives
The appliance supports up to 12 3.5" form factor SAS disk drives. The actual drives can be a mix of SSDs or HDDs. The 12 disk drive slots are located in a 3 X 4 configuration in front of the enclosure.
Enclosure Weight
Depending upon the configuration, an appliance can weigh up to 32 kg. and needs two persons to handle it.
Enclosure Environment
This section lists the specifications related to the enclosure environment. The temperature, humidity, altitude, shock and vibration are included in this category.
Temperature and Humidity
Comments